BAY SOFT – KDYC (CATIONIC SOFTENER)

Cationic softener used for cotton, wool, synthetic, fibers, fabrics and yarns made of all these blends.

Suitable for exhausting and foulard methods.

Doesn’t make permanent foam. It gives soft and slide behavior to cotton, wool and synthetic fibre

A good antistatic feature in synthetic fibre and its blends.

During softening and finishing process after painting, it forms film layer on product and maximizes paint fastness.

Prevents tossing in fibre. Doesn’t affect brightness negatively.

Can be added in paint bath during acrylic fibre painting.

Suitable for exhausting and foulard methods.

Used succesfully for avivage process and finishing and to soften cotton, wool, silk, acrylic, polyamid, polyester and all naturel-synthetic fibre blends.

Acidic environment increases softener’s affinity in fibre, so before process bath must be adjusted at 

5 – 5.5 pH value with acedic acid.

Before BAY SOFT – KDYC addition in bath, you must mix it and dilute with tepid-warm water and 

Later boiler must be fed by this mixture.

Exhausting Method: 

Usage : %2 – 3

pH : 5 – 5.5 with acedic acid

Temperature : 40 - 45 °C

Time : 20 – 30 Min. It’s dried 

Dry : 130 °C 

Foulard Method:

pH : 5 – 5.5 with acedic acid

Temperature : 20 - 40 °C

Squeezing Percentage: %80 - 100 

Usage Amount : 20 – 40 gr./lt. 

Dry : 130 °C 

Softener Dismantle Process: 

In 30 minutes and at 60 °C, softening finish is dismantled from fabric and yarn in bath including 5 cm³/lt formic acid. In this way, you can start to correct defective or abraj painting.

Protect from freezing and extreme warm. Recommended to keep in closed storage. 

Storage life is 1 year if keep under conditions of closed orginal package and keep out from cold and warm.

For sale in 125 Kg. Package and 1 Ton Containers